Models Included: – 5080, 5090B, 5110, 5130, 5230, 6015, 6020, 6030/B, 6040, 6050, 6060, 6090
UT Measurement
UT Probe must be directly over the mid- point of the pin hole. Ensure probe is clear of dirt and debris
Depth Gauge Measurement
- Place the ruler across the midpoint of the pin in both ends of the link.
- Place the depth gauge across the top of the rail perpendicular the link rail.
- Push the depth gauge pin down to the ruler Measure the length of the pin using a ruler