Shoe

Shoe Ultrasonic 

1. Check that the grouser bar has not been re-welded. If so, the ultrasonic tool cannot be used for this measurement. Use a depth gauge instead. 

2. Find the midpoint of the grouser bar. 

3. Find the midpoint between the edge and the middle of the grouser for the measurement.

4. Place Couplant at this point on this point of the grouser bar. 

5. Measure the depth with the ultrasonic tool. 

Shoe Depth Gauge

6. Place the depth gauge across two flat shoes from grouser to grouser. 

7. Place the pin through the depth gauge to the top of shoe. 

8. Measure pin length with a tape measure.