Measure the Track Shoe Tooth Length, Track Shoe Tread, Track Shoe Grouser Height and Track Shoe Pitch
Track Shoe Tooth Length – Use a pattern placed over the Tooth/Drive Lug and measure at the point 50mm above the height of the tooth base as shown on the image.
Measure the Forward Drive Side.
Then measure the Reverse Drive Side of the Tooth
Track Shoe Tread Depth – Use a ruler placed across the bae of the shoe against the drive lug and measure the depth of the Tread Path. The tread path will increase in depth as it becomes worn.
Track Shoe Grouser Height – Place the Depth Gauge across the grousers as shown in the image. Press the pin down to the surface of the Track Pad between the grousers. The measure the length of the extended Pin
Track Elongation – measure 4 sections with the starting point the same as the ending point