1,500Hrs Undercarriage Inspections
Track Pad Wear
New 1.76″
- Using a straight edge measure roller path wear on the crawler shoes. Measure as many shoes as you can from each side
- Check for any broken or damaged track pads..
- Inspect retention hardware. Replace any damaged hardware immediately.
Measure Track Pitch – New 23″
- Using track pitch gauge R56246F1 measure the track pitch of five shoes.
- Using a measuring tape measure the track pitch over ten shoes
Inspect Load Rollers
- Check load rollers for any damage or abnormal wear.
- Check condition of thrust washers.
- Check pin retainers and lock collars. Replace if damaged or missing.
- Check for fresh lube and condition of lube line and fittings.
Inspect Rear Idlers
- Check Rear Idlers for any damage or abnormal wear.
- Check condition of thrust washers.
- Check pin retainers and lock collars.
- Replace if damaged or missing.
- Check for fresh lube and condition of lube line and fittings.
Inspect Front Idlers
- Check Front Idlers for any damage or abnormal wear.
- Check condition of thrust washers.
- Check condition of Bushing.
- Check pin retainers and lock collars. Replace if damaged or missing.
- Check for fresh lube and condition of lube line and fittings.
Final Drive
- Inspect drive sprocket for damage and abnormal wear.
- Check between crawler frame and drive sprocket for visible signs of lube.
- Check Propel transmission oil level.
- Inspect the propel shaft and output seals on the transmission for leaks. From the inside of the crawler frame. NOTE: Confined Space Required