Liebherr - R994/R994B

Measuring Link with Depth Gauge  Track Pitch – Use the Ruler/Tape Measure – measure 4 complete Links. Ensure where the...

Measuring Shoe with Depth Gauge and Ultrasonics  Depth Gauge use the depth gauge placed across the shoe as shown in...

Measuring Bush with Ultrasonics and Caliper  Bush – Ultrasonic – Place Ut Probe on the Forward part of the Bush,...

Measuring Idler with Depth Gauge  Depth Gauge measure the depth of the rail wear surface from the top of the...

Measuring the Sprocket Tooth Wear both Forward and Reverse Side  Ruler Using a Pattern for the sprocket measurement X1, X2...

Measuring Track Roller with Ultrasonics and Calliper  Ultrasonic Tool – Use the Ultrasonic Tool to measure both areas of the...

Measuring the Carrier Roller with Ultrasonics and Calliper  Ultrasonic Tool Measure in the two positions indicated in the diagram Caliper...

Use the Ruler/Tape Measure Measure 4 complete Links. Ensure where the start point is the same as the end point.