Fitting the batteries
Note: The gauge can be fitted with Lithium, NiCad or NiMH rechargeable batteries which can improve the life of the...
- Home
- Measuring With Cygnus Ultrasonic Tool
Measuring With Cygnus Ultrasonic Tool
-
-
Probes
Note: The higher the frequency, the shorter the wavelength. Thicker material needs a longer wavelength to penetrate effectively. Gain is... -
Measurement Modes
Although either of the 2 modes outlined below can be used, we have found that Single echo tends to perform... -
Gauge Controls
-
Measurement Screen Views
Basic Screen Displays a large thickness measurement value. A-Scan Screen Displays the thickness measurement and a live A-Scan display of... -
Status Bar Summary
Zero the Probe Before you begin taking measurements you must first zero the probe. -
Taking thickness measurements
Taking ultrasonic thickness measurements is a straightforward process that involves first making sure the surface is clean and prepared, applying... -
Calibration
Ultrasonic thickness gauges measure time to measure the thickness of the material being tested. It relies on the principal that... -
Measurement stability Indication
To help indicate when a Single Echo or Echo-Echo measurement is stable – and thus probably reliable – the gauge... -
Battery level
A battery level graphic is displayed at the top left position of the display The gauge will periodically flash a... -
Setting The Units of measure
The Gauge can display thickness measurements in either Metric (mm) or Imperial (inch). Changing the measurement units will not affect... -
Power Off Setting
You can choose from three powersaving settings, these determine how long before the gauge will dim the display and ultimately... -
Resolution Settings
The gauge can display thickness measurements in three resolution settings: • 0.1 mm 0.005 inch All Modes • 0.05 mm... -
Display Brightness
In Automatic mode the brightness is dimmed when in dark conditions and increased when in bright light conditions. In Manual... -
Turning On Vibration Mode
This is useful for when climbing under machines and it is difficult to read the screen, the vibration will occur... -
Gain Adjustment
The gauge will normally operate in automatic gain mode and this will be suitable for virtually every measuring scenario. The... -
Switching Bluetooth On to communicate with TrackTreads Mobile App.
Press the menu button Select Setup Navigate with Arrows to the right screen and select Bluetooth Select the BLE (Blue... -
Connecting with the TrackTreads Mobile Application
First time connection After installing the mobile application for the first time and accessing a screen that allows you to... -
Troubleshooting
The Gauge will not switch on • Are the batteries exhausted, tired or just have had enough for the day? ... -
Measuring With Cygnus Ultrasonic Tool PDF Download
Need Support?
Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT