TrackTreads Knowledge Base
  • System Administration
  • Undercarriage
  • Digital Inspections
  • GET, Buckets & Trays
  1. Home
  2. How to Measure Undercarriage Components
  3. Hydraulic Shovel
  4. Caterpillar
  5. Model: 6015B
Searching...

Model: 6015B

  • Link

    Link – Ultrasonic  1 – Measure the rail over the bush strap or the bush end of the link.  2...
  • Bush

    Bush Caliper  1 – Measure the forward wear surface, as per the diagram. Check the measurement with a tape measure.  ...
  • Shoe

    Shoe Ultrasonic  Shoe Depth Gauge
  • Track Elongation

    Track Pitch – Four Links 
  • Lower Roller

    Lower Roller Depth Gauge  Lower Roller Ultrasonic 
  • Upper Roller

    Upper Roller Caliper  Upper Roller Ultrasonic  Ensure measurement is not over a bolt hole. 
  • Idler

    Idler – Depth Guage 
  • Sprocket

    Sprocket – Tape measure/Calipers  Measure the sprocket as shown in the diagram. Ensure the measurement is taken from the end...
  • Caterpillar Hydraulic Shovels – PDF Download

    Please click the link here to download or print a users guide to measuring Caterpillar Hydraulic Shovels
Need Support?
Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT

Need Support?

Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT

Knowledge Base Categories

  • Workshop Repair Estimate – WSRE
  • Web Portal
  • Using the Mobile Application
  • Users, Customers, Jobsites, Dealers, Access
  • Undercarriage OLD
  • Undercarriage Inspection Guides
  • Undercarriage Best Practices
  • Undercarriage Administration Tasks
  • Undercarriage Admin
  • Undercarriage
  • Tray
  • System Administration – OLD
  • Swapping Track Rollers
  • Swapping Idlers front to Rear and Vice Versa
  • Supervisory Tasks
  • Shoe Rebar/Regrouse
  • Setup Undercarriage
  • Setup Digital Inspections
  • Setup Buckets & Trays
  • Rope Shovel Measurements
  • Review and Reporting
  • Reporting
  • Repairs & Rebuilds
  • Reliability & Interpretation Tasks
  • Release Notes
  • Recording Midlife Maintenance
  • Recording Component Replacements
  • Planning
  • Performing Inspections
  • Oval Config Dozer
  • Other Observations
  • Old Menu Structure
  • Models: 6030, 6040, 6060, 6090
  • Model: 6020B
  • Model: 6015B
  • Mobile Inspections
  • Measuring With Cygnus Ultrasonic Tool
  • Makes, Models & Equipment
  • Liebherr – R996/R996B
  • Liebherr – R994/R994B
  • Liebherr – R9800
  • Liebherr – R9600
  • Liebherr – R9400
  • Liebherr
  • Liebherr
  • Komatsu
  • Job Site Conditions
  • Inventory
  • Interpretation
  • Inspection Review & Reporting
  • Inspection Kits
  • Hydraulic Shovel Component Measurements
  • Hydraulic Shovel
  • How to Measure Undercarriage Components
  • How Do I Use the System?
  • Hitachi
  • GET, Buckets, Trays Administration
  • GET, Buckets, Trays & Chassis
  • Frame Rebuilds
  • Field Inspection Tasks
  • FAQ
  • Excavator Measurements
  • Excavator
  • EX8000
  • EX2500/2600/3500/3600/5500/5600
  • EX1200/EX1900/EX2000
  • Elevated Sprocket Dozer
  • Dozers
  • Dozer Measurements & Observations
  • Digital Inspections
  • Digital Field Inspections Admin
  • Checksheets
  • Caterpillar
  • Bush turn
  • Buckets
  • Bucket, Tray and Chassis Crack management
  • Actions

Need Support?

Can't find the answer you're looking for?
Contact Support

Categories

  • No categories
© Copyright TrackTreads Knowledge Base.