Excavator

Link Pitch/Track Extension on a single Link Use the tape measure to measure from the start/Middle/end of the bush on...

Measuring with Depth Gauge Measuring with an Ultrasonic Probe To ensure correct measurement is taken, always measure on the inside...

Measuring with an Ultrasonic Tool Measuring the Bush with a Caliper Measuring with the Calipers

Measuring with Depth Gauge Measuring with Ultrasonic Tool

Measuring the Sprocket with Calipers Sprocket Bottom Sprocket Tooth

Measuring the Idler with Depth Gauge

Measuring with UT Measuring with the Calipers

Measuring with UT Measuring with Calipers Measuring with Depth Gauge

Guards over the Track Rollers are a hinderance to measuring the Track Roller Wear, but there are alternative methods to...

Please click the link here to download or print a users guide to measuring excavators