Komatsu – Track Pitch/Chain Elongation – A
Models Covered: – PC2000-8, PC3000, PC4000, PC5500, PC8000 This is the most important measurement for determining whether there is pin...
Komatsu
-
-
Komatsu – Circular Pitch (between Sprocket and Track pad – Forward and Reverse)
Models Covered: – PC2000-8, PC3000, PC4000, PC5500, PC8000 The sprocket circular pitch forward mode measurement is best done by moving... -
Komatsu – Track Pad Wear – C
Models Covered: – PC2000-8, PC3000, PC4000, PC5500, PC8000 Part Numbers D403K000M05 & D403K000M05KOM Track Pad wear is measured using a... -
Komatsu – Bottom Roller Wear Diameter – D
Models Covered: – PC2000-8, PC3000, PC4000, PC5500, PC8000 Part Numbers A403K000M00 & A403K000M00KOM Bottom rollers should be measured using callipers.... -
Komatsu – Top Roller Wear Diameter – E
Models Covered: – PC2000-8, PC3000, PC4000, PC5500, PC8000 Part Numbers C403K000M00 & C403K000M00KOM Top rollers should be measured using callipers.... -
Komatsu – Diameter of Idler – F
Models Covered: – PC2000-8, PC3000, PC4000, PC5500, PC8000 Part Numbers P403K400M00 & P403K400M00KOM The idler diameter is best measured using...
Need Support?
Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT