Liebherr - R9400

Measuring Dual Pin Track Pad – Roller Path through Pin Strap, Roller Path Full Pad Thickness, Drive Lug Forward and...

Measuring Standard Chain consisting of Link Bush and Shoe. Link with Depth Gauge and Ultrasonics  Track Pitch – Use the...

Measuring the Bush with Ultrasonics and Callipers  Ultrasonic – Place Ut Probe on the Forward part of the Bush, thenmeasure...

Measuring Shoe with Depth Guage and Ultrasonics  Depth Gauge – use the depth gauge placed across the shoe as shown...

Measuring with Depth Gauge Idler – Depth Gauge – measure the depth of the rail wear surface from the top...

Measuring with Ruler Sprocket Tooth Wear – Ruler – Using a Pattern for the sprocket measurement X1, X2 and X3 

Measuring with Ultrasonic and Caliper Ultrasonic – Use the Ultrasonic Tool to measure both areas of the roller surface in...

Measure with caliper Caliper – measure carrier roller in a number of positions using the caliper